---- The tower elevator is a special elevator used for separate structural facilities with a large height (100-500m) with particular purpose. It adopts the unique down-setting hoist and the anti-swing design. Due to the stretching problem of the steel wire rope, it is specially designed with the smooth crawling compensation device in the door area to ensure that the operation quality of such elevator is the same as that of the ordinary elevator.
Specifications of Tower Elevator
Unit: mm
| Rated load |
Persons | Rated speed |
Traction ratio |
Control mode |
Method of drag |
Dimension of car | Dimension of door opening | Dimension of hoistway |
Over head |
Pit depth |
|||
| width | depth | width | height | width | Depth | ||||||||
| kg | Num | m/s | A | B | E | F | C | D | Q | P | |||
| 800 | 10 | 2.5 | 2”1 | JXSN-LF Fully collective selection serial communicate with(or without) driver |
Control of VVVF gearless synchronous frequency And pressure conversion vectors |
1400 | 1350 | 800 | 2100 | 2000 | 2100 | 5100 | 2100 |
| 3.0 | 2150 | 2150 | 5300 | 2800 | |||||||||
| 4.0 | 2150 | 2250 | 6100 | 3900 | |||||||||
| 1000 | 13 | 2.5 | 1600 | 1500 | 900 | 2100 | 2200 | 2200 | 5100 | 2100 | |||
| 3.0 | 2300 | 2300 | 5300 | 2800 | |||||||||
| 4.0 | 2300 | 2400 | 6100 | 3900 | |||||||||
| 1250 | 16 | 2.5 | 2000 | 1400 | 1100 | 2100 | 2600 | 2300 | 5100 | 2100 | |||
| 3.0 | 2600 | 2400 | 5300 | 2800 | |||||||||
| 4.0 | 2600 | 2500 | 6100 | 3900 | |||||||||
| 1600 | 21 | 2.5 | 2000 | 1750 | 1100 | 2100 | 2600 | 2600 | 5100 | 2100 | |||
| 3.0 | 2700 | 2700 | 5300 | 2800 | |||||||||
| 4.0 | 2800 | 2800 | 6100 | 3900 | |||||||||
| 2000 | 26 | 2.5 | 2000 | 2000 | 1100 | 2100 | 2800 | 2800 | 5100 | 2100 | |||
| 3.0 | 2800 | 2900 | 5300 | 2800 | |||||||||
| 4.0 | 2800 | 3000 | 6100 | 3900 | |||||||||
Tower Elevator